FuelX Pro Plus - is it a miracle??

sam2019

sam2019

Administrator
Staff member
Distributor
Developer
477 Owner
I have called Varun from RD and he confirmed that the plus version of the fuelx pro also only uses data from the o2 sensor.

he insists that they have achieved 25% power gain.

I guess I have to buy one to find out.

any feedback?
 
Well it only uses data from the O2 sensor because that is the only connection it has to the Engine. :cool:
 
I ordered one for the Meteor - soon enough we will find out !
 
I installed the FuelX Pro+ and there is an improvement in acceleration, but certainly not a 25% improvement.
This is a 500cc Meteor with Powertronic as well. The engine is still prone to knocking, I have upped the fuel in the PT mapping to 75% but it still knocks, so now I am considering widening the head to 84mm to reduce compression.
 
Will find out tomorrow when my mechanic brings the measuring tool.
 
sam2019 said:
I installed the FuelX Pro+ and there is an improvement in acceleration, but certainly not a 25% improvement.
This is a 500cc Meteor with Powertronic as well. The engine is still prone to knocking, I have upped the fuel in the PT mapping to 75% but it still knocks, so now I am considering widening the head to 84mm to reduce compression.
Click to expand...
Hey sir I have classic reborn only decated recently installed fuel x pro plus, I want to know what's is best setting for city city commuter I mean which map shall I use I am asking you this because I think u know better about airfuel ratio in decated engine please guide
 
no idea, as a general rule in city traffic where you accelerate and decelerate a lot fuelx has very little influence bc its close loop only and during the accelerations / change of movement the engine runs in open loop.
 
You must log in or register to reply here.
Back
Top